Blaster 7x Thrusting Silicone Vibrator - Pink

Plenty of "thrusting" toys barely move. This one actually pumps. The Blaster 7x from Curve Toys drives in and out on its own while it vibrates, and the slight upward curve at the tip is built to sit right against your G-spot instead of poking past it. Warm it up with lube, ease it in, and let the motor do the work.

What you get

• Real thrusting motion: 3 thrust modes so you can go slow and teasing or fast and deep.
• 7 vibration patterns + 3 speeds: mix and match steady buzz, pulses, and waves independently of the thrusting.
• Three flexing ribs along the shaft that swell and stretch as it pumps for extra fullness.
• Curved G-spot head: shaped tip angled to find the spot without you doing the aiming.
• IPX6 splashproof: fine for the shower and rinse-offs, but don't dunk it or take it in the bath.
• Magnetic USB charging: the included cable clicks on, no fiddly ports to line up.

Heads up: because it has a motor pushing a shaft, it's a little louder than a plain bullet vibe. Nothing the roommates will hear through a door, but it's not silent.

Materials & care

Made from premium body-safe silicone that's phthalate-free and latex-free, so pair it with a water-based lube only (silicone lube degrades silicone toys). Wash with warm water and a mild toy cleaner before and after use, let it air dry, and recharge with the magnetic USB cable. Store it somewhere clean and dust-free.

FAQ

Is it fully waterproof?
No. It's rated IPX6, which means it shrugs off shower spray and splashes, but it should not be submerged. Great for the shower, not for the tub.

What's the difference between the thrust modes and the vibration patterns?
They run separately. The 3 thrust modes control how fast the shaft pumps in and out, and the 3 speeds plus 7 patterns control the buzz. You can crank one and dial back the other.

What lube should I use with it?
Water-based only. Silicone-based lubes can break down silicone toys over time and leave the surface tacky, so stick with water-based and reapply as needed since silicone can dry it out faster.